Locked out of Bathroom?
Don’t laugh, it happens to everyone sooner of later and it is very simple to open the locked bathroom door.
For a door that has a privacy lock (the kind with a hole in the knob on the outside), keep a tool handy that will open this door if it is locked by your toddler with you on the outside and your toddler on the inside. The tool can be made from a piece of coat hanger or a metal skewer from the kitchen drawer or the inside of a ballpoint pen. Kept handy, it could save you from considerable anxiety and frustration trying to get a toddler to unlock the door.
• Put tool straight into the hole in the knob.
• The tool will stop approximately 1 inch to 1½ inside the knob.
• Gently but firmly push the tool just a little bit, approximately ¼ inch (you are pushing the spring loaded release button).
• You should hear a “pop” or “clunk” as the lock unlocks.
• Turn handle.
Again, if the bathroom lock has a round hole take a wire coat hanger and bend it straight. Stick it directly in the hole (straight and level) and feel for a springy button… when you feel it, simply push and it should release the lock. If this is not successful, make sure the tool is level and is dead center, or call me for help.
This method works for 99 percent of the bathroom locks in Vancouver and the Lower Mainland, however, I have been called out to open locked bathrooms that were broken and occasionally tI have seen bathroom locks that do not have the small hole in the center of the handle. We only charge $95 to open the locked bathroom door (7 days/8am to 8pm, and 24hr Emergency Locksmith Service is available.
We’re a family owned and operated business that provides Professional Locksmithing & Security Services in Vancouver, North Vancouver, West Vancouver, Richmond, Ladner, Delta, Tsawwassen, New Westminster, Burnaby, Coquitlam, Port Coquitlam, Port Moody, Maple Ridge, and Surrey on a 24 hour basis. All our locksmiths are family. We’re competent, reliable, and friendly.
Just call and book an appointment for a Professional Locksmith from Mr. Locksmith (BC Security Licensed Locksmith) to help you.
Terry Whin-Yates
BA (Hons) Criminology
3rd Generation Locksmith
25 Years Experience
BC Security License : B4227
604-773-5625
Terry Whin-Yates
BA (Hons) Criminology
3rd Generation Locksmith
25 Years Experience
BC Security License : B4227
We’re a family owned and operated business that provides Professional Locksmithing & Security Services in Vancouver and the Lower Mainland.
Many unlicenced so called locksmiths in the Vancouver area. The BC Government has locksmith licence requirements for anyone advertising as locksmith, doing business as a locksmith or locksmith company. The minimum requirements are two (2) years experience working with a BC Lic Locksmith. Also, the Industry Training Authority (ITA) has minimum training requirements of two years working with a lic locksmith.
I have been in the Locksmith business for over 25 years and I have a BC Security Business Lic. (B4227).
Locksmithing SCAMS have been for years running throughout North America and have been in Vancouver for several years. They quote you over the phone $29.00 to open your locked door and then charge hundreds of dollars. Or they are unqualified and unlicenced.
You can protect yourself from these scammers by going to the BC Government website.
You can “Verify Locksmith Security Business licence” at the following BC Government site:
http://www.pssg.gov.bc.ca/securityindustry/training/index.htm
Security Licence Status Verification
Verify a Security Business Licence Results
www.mrlocksmith.com1 result found for security licence number b4227
Legal Business Name
24 HR MR.LOCKSMITH INC.
Trade Name
MR. PROLOCK LOCKSMITHS,& AA AUTOMOTIVE LOCKSMITHS, & TERRY WHIN-YATES
Licence Number: B4227
Licence Status
VALID
Licence Type(s)
LOCKSMITH.
I hope this helps to protect you.
I will start to publish the names and addresses of these people and companies and what the BC Government is doing, Also, I have put an official complaint against one of these companies and the person running it. Future Blogs I will post my letter and their response,
Terry Whin-Yates
604-773-5625
Terry Whin-Yates BA Hons (Criminology)
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
24 hr Mr. Locksmith
Ford Focus Faulty ignition (2000-2003).
Does your Ford Focus ignition have one or more of the following problems:
- Difficulty in turning the key in the ignition.
- Sticking ignition.
- Key is dirty after removing or turning.
- Unable to remove the key.
- Key locked in a position.
- Key will no longer turn the ignition.
Unfortunately, this is a common problem. The Ford Focus sidebar ignition cannot be repaired and must be replaced. The problem with faulty Ford Focus ignitions has resulted in a class action lawsuit on behalf of California residents who “either own or lease a Ford Focus, or who have paid to repair or replace an ignition lock in a Ford Focus.”
We replace your broken Ford Focus ignition with a quality replacement product from Strattec that is designed without the problem components. If you use the use other products they have the same design faults and the lock may fail again. Also, we key the lock to match your door locks so you don’t have to carry two keys for your car.
If your ignition is just starting to give you problems call us now to save money and headaches.
The cost for our mobile automotive locksmith to remove, rekey and replace the Ford Focus ignition is $225-$295 (+ tax).
Terry Whin-Yates BA Hons (Criminology)
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
Mr. Prolock Locksmith
604-773-5625
www.mrprolock.com was voted Best Locksmith in the City of Vancouver by Vancouver Magazine.
Terry Whin-Yates BA Hons (Criminology)
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
“LOCKED OUT? You’re in trouble. 2 a.m., nobody’s home, your keys are gone. Terry Whin-Yates is your man. Here’s why:
1) you get a human being on the phone, not a message; 2) he shows up pronto; 3) he’ll give you a quote before coming over; 4) he’s a third-generation locksmith; 5) he had a key machine in his room when he was nine; 6) his sons work for him; 7) he has a BA in criminology from SFU and does forensic locksmithing;  he’s seen it all, from a priest locked out in his underwear to women in chastity belts. ”
Terry Whin-Yates BA Hons (Criminology)
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
604-773-5625
www.mrprolock.com
www.mrprolock.com Locksmith School and Training
Best Locksmith Training in Canada and Vancouver based by
Terry Whin-Yates
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
604-773-5625
In Vancouver (Broadway/Boundary Rd) I will be offering my Five (5) days hands (M-F, 8:30-5:30pm) on Institutional and Basic Locksmith Training as follows:
November 22-26, 2010 (M-F, 8:30am-5:30pm) in Vancouver, BC
December 13-17, 2010 (M-F, 8:30am-5:30pm) in Vancouver, BC
Each student will cut over 100+ keys per students (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Each student will design a mini Master key system and master key their locks. This is a hands on locksmith training class, no watching movies, you will learn hands on, you do the work. This is not a correspondence course.
The Locksmithing Class is $1500.00 and includes all supplies, lock picks, tools and material needed to take the course with. The locksmith class is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners. The Mr. Prolock Five Day Institutional Locksmithing Class is available onsite with a minimum of four (4) students. Call or e-mail to arrange a class or for next course dates.
Note: All students must pass a criminal records check. (except Police, Hospital or School employees). Call or e-mail for details.
Go online as follows:
http://www.pssg.gov.bc.ca/securityindustry/eservice/index.htm
and complete the “Security Employee” application and check off the “Locksmith Under Supervision” box.
Note: you can mail the application to Victoria but the online process is quicker. I will complete the ITA Apprentice application the first day of the locksmith class.
NOTE: I HAVE HIGH STANDARDS, NO ONE WITH A CRIMINAL RECORD CAN TAKE MY LOCKSMITH COURSE
Terry Whin-Yates BA Hons (Criminology)
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
604-773-5625
www.mrprolock.com
Locksmith School Mr. Prolock Locksmiths Vancouver, British Columbia, Canada
www.mrprolock.com
In Vancouver I will be offering my Five (5) days hands (M-F, 8:30-5:30pm) on Institutional and Basic Locksmith Training as follows:
November 22-26, 2010 (M-F, 8:30am-5:30pm)
December 13-17, 2010 (M-F, 8:30am-5:30pm)
Each student will cut over 100+ keys per students (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Each student will design a mini Master key system and master key their locks. This is a hands on locksmith training class, no watching movies, you will learn hands on, you do the work. This is not a correspondence course.
The Locksmithing Class is $1500.00 and includes all supplies, lock picks, tools and material needed to take the course with. The locksmith class is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners. The Five Day Institutional Locksmithing Class is available onsite with a minimum of four (4) students. Call or e-mail to arrange a class or for next course dates. Note: All students must pass a criminal records check. (except, Police, Hospital or School employees). E-mail or call for details. info@mrprolock.com
Terry Whin-Yates BA Hons (Criminology)
3rd Generation Master Locksmith
25+ Years Experience
BC Security License : B4227
Toll Free 1-866-886-5006
www.mrprolock.com
In Vancouver on Monday September 13, 2010 I will be offering my Five (5) day hands on Insitutional and Basic Locksmithing Training. Each student will cut over 100+ keys per students (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Each student will design a mini Master key system and master key their locks. This is a hands on locksmith training class, no watching movies, you will learn hands on, you do the work. This is not a correspondence course.
The Locksmithing Class is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners. The Five Day Instiutional Locksmithing Class is available onsite with a minimum of four (4) students. Call or e-mail to arrange a class or for next course dates.
Call Terry today 1-604-773-5625
Ford Focus ignition (2000-2003).
Does your Ford Focus ignition have one or more of the following problems:
- Difficulty in turning the key in the ignition.
- Sticking ignition.
- Key is dirty after removing or turning.
- Unable to remove the key.
- Key locked in a position.
- Key will no longer turn the ignition.
Unfortunately, this is a common problem. The Ford Focus sidebar ignition cannot be repaired and must be replaced. The problem with faulty Ford Focus ignitions has resulted in a class action lawsuit on behalf of California residents who “either own or lease a Ford Focus, or who have paid to repair or replace an ignition lock in a Ford Focus.”
We replace your broken Ford Focus ignition with a quality replacement product from Strattec that is designed without the problem components. If you use the use other products they have the same design faults and the lock may fail again. Also, we key the lock to match your door locks so you don’t have to carry two keys for your car.
If your ignition is just starting to give you problems call us now to save money and headaches.
The cost for our mobile automotive locksmith to remove, rekey and replace the Ford Focus ignition is $225-$295 (+ tax).
Terry Whin-Yates
Mr. Prolock Locksmith
604-782-6996
Summer is now here and I am about to start my cross Canada Locksmith Training trip. I will be offering my Five (5) days hands on Insitutional and Basic Locksmithing Training. Each student will cut over 100+ keys per students (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Each student will design a mini Master key system and master key their locks. This is a hands on locksmith training class, no watching movies, you will learn hands on, you do the work. This is not a correspondence course.
The Locksmithing Class is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners. The Five Day Instiutional Locksmithing Class is available onsite with a minimum of four (4) students. Call or e-mail to arrange a class or for next course dates.
Call Today 1-866-886-5006.
PROGRAM YOUR FORD CAR OR TRUCK KEYS
To start programming your keys follow the following directions: Note: I will continue to publish more in the future.
1997 Ford, Lincoln, Mercury
1998 Ford, Mercury
Add duplicate Key:
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and within 15 seconds insert the new key and turn it to ON (RUN).
4. The security light will light up for 2 seconds to indicate success in programming the key into the vehicle
1998+ Ford, Lincoln, Mercury
1999+ Ford Mercury
Add duplicate Key (*Requires two working keys that start the car)
1. Insert an existing working key into the ignition cylinder.
2. Turn the ignition cyllinder to ON (RUN) and back to OFF.
3. Remove the existing key and within 5 seconds insert the 2nd key working key and turn it to ON (RUN) then back OFF.
4. Insert the new key before 10 seconds have elapsed and turn it to ON (RUN) Leave it on for 1 second and turn back to OFF.
5. The security light will light up for 3 seconds to indicate that the new key has been successfully programmed.
*Note: If you don’t have two working keys AA Automotive locksmiths www.automotivelocksmiths.com has the Programmer and Diagnostic Tools to re-program the vehicle.
REMOTES
FORD Focus (Radio 3 Button) – Key Remote Programming
1. Switch Ignition On/Off (II/0) 4 times within 6 seconds until a sound is made.
2. Press any button on Remote until a sound is made.
3. To program additional Remotes, repeat after 2 seconds after the sound.
4. Turn Ignition On/Off to exit.
5. A maximum of 4 remotes can be programmed.
FORD Cougar (Radio 3 Button) – Key Remote Programming
Procedure
1. Turn Ignition On (II) and Off (0) 4 times within 6 seconds
2. With the Ignition at 0 the PATS LED should light continuously.
3. Press any button on the Radio Remote within 10 seconds
4. The LED should flash to acknowledge
5. Further Remotes (max. 4) can be added by pressing any button.
6. Program mode will end if Ignition turned on, or no new Remote Detected within 10 seconds
NOTE : The first Cougars were 3 seconds instead of 6, and 20 seconds instead of 10.
MORE PROGRAMMING TRANSPONDER KEYS THE FUTURE
The British Columbia government has introduced legislation that would empower Richmond, Vancouver and Whistler, for the months of February and March in 2010, to act swiftly to remove graffiti or signs that contravene their bylaws.
The act empowers authorities in Vancouver, Richmond and Whistler to enter homes and remove or cover up “unauthorized” signs during the Winter Games.
I will not open any house or apartment because a city bylaw officer or an Olympic official wants a sign removed. We have a CANADIAN CHARTER OF RIGHTS AND FREEDOMS “ 8. Everyone has the right to be secure against unreasonable search or seizure.” We are not a police state and the Miscellaneous Statutes and Amendment Act will add to B.C.’s undeserved growing reputation as a police state.
In my opinion, locksmiths are professionals and should not tarnish our image by becoming involved in political legislation that do nothing to reduce the highest Break and Enters in Canada, if not North American, and our ongoing gang killings.
In conclusion, I will not pick open any home to help some bureaucrat have a harmless sign removed.
Terry Whin-Yates
604-773-5625
Vancouver and the Lower Mainland have some of the highest break-in rates of all major Canadian and American cities. Vancouver has nearly four times the break-in rate of New York City.
I just had a call this morning from a lady who had just returned home from vacation and her front door had been kicked in. The cheap deadbolt and door had been broken (I will add pictures later this week). Many of the break-ins I see the front door has been kicked in, the resulting damage is either everything looks perfect except the cheap deadbolt is intact but the end of the bolt is still in the door frame or the metal door (with wooden edges) has folded over. Sometimes the door jam is broken. In Vancouver and now parts of Richmond I am seeing deadbolts that have been opened by an ice pick. Occasionally, I see locks that have been bumped from bump keys. In the next few blogs I will add some pictures from break-ins and check out my web (www.mrprolock.com) for some ideas on how to prevent these types of break-ins.
|
